The DB9 to OBD-II adapter cable is a simple adapter to allow the EasySYNC range of CANbus products to mate to OBD-II interface connectors commonly used in automotive diagnostics. The DB9 end plugs directly into the EasySYNC CANPlus modules or any CANbus adapter that conforms to the CAN-in-Automation (CiA) DS102-2 pin-out. The OBD-II end plugs directly into an automotive diagnostic port. The cable functions only with the CANbus portion of the OBD-II specification.
The Cable incorporates a standard DB9 Female connector and an OBD 16 Pin Male connector for communication between the EasySYNC CANbus products and OBD-II interface.
The EasySYNC CANbus products can be found at the link below:
http://www.easysync-ltd.com/category/123/can-bus-solutions.html
The Cable incorporates a standard DB9 Female connector and an OBD 16 Pin Male connector for communication between the EasySYNC CANbus products and OBD-II interface.
The EasySYNC CANbus products can be found at the link below:
http://www.easysync-ltd.com/category/123/can-bus-solutions.html
No comments:
Post a Comment